Page 3 of 77. Showing 770 results (0.154 seconds)
Configurable bleed path settings
You can edit bleed path settings in Preferences or the job properties > Die Attributes pane to specify not only the size of the bleed margins, but, in cases where Pandora does not bleed correctly on the first attempt, you can use the settings to modify parameters, and have the software generate bleeds again. 您可以在“首选项Resolving bleed overlaps between rectangular work
If the bleeds of rectangular artwork overlap, you can resolve them automatically. You do not need to select the artworks. Select Object > Resolve Rectangular Bleeds. Tip: If you set the Nudge distance in Preferences under Measurements to the same size as your Bleed margins preference, you can use the Bleed toolExceptions to automatic extraction of the bleed path
Pandora extracts the shape of the bleed path by analyzing the cut lines in the die station. Failure to extract a bleed path can be caused by: Gaps in the cut … (this circumstance results in a malformed bleed path) Pandora 通过分析刀版台中的剪切线来推断出血路径的形状。 可能导致推断出血路径失败的原因有： 剪切线轮廓中的间距 从刀版台伸出的剪切线。 如果刀版在刀版台之间需要剪切线，则将这些剪切线定义为顶级元素（即不属于定义刀版台的块的组成部Resolving bleed path based on CAD file line type
Automate bleed path resolution by creating all the bleed with overlaps as a special line type in the CAD program you use (for example, Esko Artios or Arden Impact). The Pandora software will use this line type to create the bleed. Perform the following procedure to set up bleed path resolution based on CAD file lineResolving bleed path based on CAD file line type
Automate bleed path resolution by creating all the bleed with overlaps as a special line type in the CAD program you use (for example, Esko Artios or Arden Impact). Both the PLA software and the Pandora software will use this line type to create the bleed. Note: You must have made similar adjustmentsSetting bleeds for non-rectangular work
When you snap an artwork to a die station, the Pandora software tries to extract the shape of the artwork from the die station. The initial bleed path of the artwork is offset from the shape of the die station by the amount you specified in the Preferences > Bleed margins box. If the software cannot extractResolving individual bleed overlaps in non-rectangular artwork
When you select the Overlap tool from the main toolbar, Pandora software detects and highlights any overlapping bleeds. You can use the Overlap tool to resolve … toolbar, select the Overlap tool. In the layout, double-click the overlap region. Here is an example of a bleed overlap. The Bleed tool is currently selected, soResolve bleed path based on CAD file line type
Pandora can be configured to automate bleed path resolution when a special line type is used in your CAD program. When you snap an artwork to the die, Pandora will use the special line type and resolve the bleed automatically. Only if Pandora is not able to find this line type or if there is a problem with the dieResolving matching bleed overlaps in non-rectangular artwork
When you select the Overlap tool from the main toolbar, Pandora software detects and highlights any overlapping bleeds. You can resolve matching overlapping bleeds simultaneously. The overlap areas must have the same shape and the same number of points in the bleed path. You can resolve matching overlapping bleedsBleed path
You can edit bleed settings in Preferences or in the job properties > Die Attributes area to specify not only the size of the bleed margins, but also, in cases where the Pandora software does not bleed correctly on the first attempt, to modify parameters and have the software generate bleeds again. Select Pandora