Page tree
Skip to end of metadata
Go to start of metadata

Prinergy servers and workstations must meet specific hardware and software requirements to be supported with this version of Prinergy.
Read the following topics closely and ensure that your system and any connected or integrated components meet or exceed these requirements prior to upgrading. If you have any questions, contact your local Response Center.

 

Supported servers

Prinergy Workflow 8.0 requires Windows Server 2008 R2 x64 or Windows Server 2012 R2 on one of the following Dell platforms:


Windows 2012 R2

Generation 12/13 Premium and High-Performance Servers


Dell PE T620/R720,
Dell PE T630/R730

Generation 12/13 Premium Servers


Dell PE T620/R720,
Dell PE T630/R730

Generation 12 Performance Plus Servers


Dell PE T320

Generation 12 Performance Servers


Dell PE T320

Supported as primary server, EPM+, secondary server, and render station

Supported as secondary server and render station


Windows 2008 R2 x64

Generation 11/12/13 Premium
and High-Performance Servers

 

Dell PE T610/R710,
Dell PE T620/R720,
Dell PE T630/R730

Generation 11/12/13 Premium Servers

 


Dell PE T610/R710,
Dell PE T620/R720,
Dell PE T630/R730

Generation 11/12 Performance Plus Servers

 


Dell PE T310/T320

 

Generation 11/12/13 Performance Servers



Dell PE T310/T320

 

Supported as primary server, EPM+, secondary server, and render station

Supported as secondary server and render station

 

Secondary servers (also called render stations) with direct connectivity to output devices only support Windows Server 2008 R2 x64.
Prinergy Workflow 8.0 is also supported in a virtual environment under VMware VSphere (VMware ESXi) versions 5.0, 5.5 and 6.0.

 

Memory requirements

Prinergy primary servers and Hot Standby servers require a minimum of 12 GB RAM. Prinergy secondary servers and render stations require a minimum of 8 GB RAM.

 

Storage requirements

Prinergy Workflow 8.0 requires system drives with a minimum of 146 GB storage space (with at least 10 GB free space) on primary servers and system drives with a minimum of 73 GB storage space (with at least 10 GB free space) on secondary servers and render stations.

If upgrading from a version of Prinergy with Oracle 11 integrated, make sure that during the upgrade you have at least 3x the amount of disk space currently occupied by the database (J:\Oracle) available on the drive where the database is installed (default drive J:\Oracle).

We recommend using the Precheck tool that is included in the installer ahead of the upgrade. It will calculate the required space and warn you if it is insufficient.

 

Archive media

As of Prinergy Workflow 6.0, archiving to tape is no longer supported. You can switch to archive-to-disk, which has been available since Prinergy 5.0 or use a third party archiving solution for your jobs.

 

Hot Standby (EPM) servers

Prinergy Workflow 8.0 supports Vision Solutions Double-Take software 5.3 under Windows 2008 and version 7.1 under Windows 2012 R2. Double-Take upgrades are performed by a Kodak engineer during the operating system upgrade.

  • No labels