Page tree
Skip to end of metadata
Go to start of metadata

Add 

In the center pane, click to add a new digital device. For example, NexPress.


Delete 

In the center pane, click to delete the selected digital device.


Refresh 

In the center pane, click to refresh the list of digital devices. This is useful if digital devices were added in Prinergy Administrator. To see these devices in Setup, click this button.


Import Substrate

In the right pane, click this button to import the substrate list from the selected digital device.
Note: If you try to import substrates and/or reload device capabilities (in Setup > Equipment > Digital Device) from a connected HP press or DFE while this device is down, the substrates and/or device settings will no longer be visible in the Digital Job Ticket Editor when you submit a job. Once the device is up and running, you must re-import the substrates and/or reload the device capabilities so that they are visible again in the Digital Job Ticket Editor. [PRINERGY-44749]


Reload device capabilities 

In the right pane, click this button to reload the settings from the selected digital device.
Note: If you try to import substrates and/or reload device capabilities (in Setup > Equipment > Digital Device) from a connected HP press or DFE while this device is down, the substrates and/or device settings will no longer be visible in the Digital Job Ticket Editor when you submit a job. Once the device is up and running, you must re-import the substrates and/or reload the device capabilities so that they are visible again in the Digital Job Ticket Editor. [PRINERGY-44749]


Device ID

Displays the unique ID of the digital device as specified in the JDF file. This property is read-only and cannot be edited.


Device Path

Displays the path to the device's location (a network location via a UNC path \\servername\sharedfolder\path\devicename, such as
\\Nexpress). This is done in order to be aligned with the Device Path setting in the process templates.


Model Name

Displays the model name of the digital press


Model Number

Displays the model number of the digital press


Min. Substrate Width

Displays the minimum substrate width that fits this digital press


Min. Substrate Height

Displays the minimum substrate height that fits this digital press


Max. Substrate Width

Displays the type the maximum substrate width that fits this digital press


Max. Substrate Height

Displays the maximum substrate height that fits this digital press


Substrate Weight Min.

Displays the minimum substrate weight for this digital press


Substrate Weight Max.

Displays the maximum substrate weight for this digital press


Default Resolution

This setting displays the supported resolution of the digital device as specified in the JDF file. If the device supports more than one resolution, you can select one of the resolutions as the default one.


The tabs below the settings described above (Screening, Finishing, Printing Params, Job Setup and Substrate Options)  contain detailed settings loaded from the digital device. To define the default values of someof these settings, select the relevant check box. The value you select will appear as the default value of the setting in the Digital Job Ticket Editor.

  • No labels